15KW 3-phase full control PFC
Release time:
2023-05-24 13:40

PROJECT INTRODUCTION
This solution is a three phase six switch PFC design, supporting bi-directional energy flow; PIM IGBT module is sellected to get smallervolume and higher power density: TI DSP is designed to accomplish7-segment SVPWM three-phase PFC control, reducing the switchingloss, and the system efficiency is higher than 97%%. The power factorunder the rated load is up to 0.999, and iTHD is smaller than 2%.
DESIGN SPECIFICATION
| Input Voltage | 380Vac |
| Output Voltage | 380Vac |
| Rated Power | 15KW |
| Switching Frequency | 16KHz |
| System Efficiency | > 97% |
FEATURES
· Three phase six switching BOOST rectifier;
· 7-segment SVPWM digital control, smaller iTHD:
· 1.5MHZ AMR current sensor,higher sampling precision and faster response:
· Simple bootstrap circuit to drive IGBT to reduce cost and size:
· RS485 communication;
· 4-20mA current loop parallel communication, faster response:
MAIN TOPOLOGY

MAIN DEVICES
| Function | Part Number | Brand |
| IGBT Module | XNG50D24TC3S6 | Xiner |
| Current Detection | MCA1101-50-3 | Aceinna |
MEASUREMENT RESULTS AND WAVEFORMS
Efficiency curve
PF Curve
Soft start @ no load
Working waveform @ full load
3-phase current woveform @ full load
Start up @ full load
Dynamic: no load->full load
Dynamic: full load->no load
3-phase unbalance working waceform
PFC OVP protection
Download related files